Skip to main content
Calera-1 Reference Silicon · Live Verified Hardware

Calera-1: The Physical
Circuit Breaker for AI.

“The model may imagine anything. The machine may only execute what the silicon permits.”

Robots, aircraft, surgical systems, and energy grids are stepping out of locked steel cages into the human world. Calera-1 is a physically isolated, deterministic safety co-processor wired directly between probabilistic AI hosts and real-world actuators—verifying locked physical envelopes in 40 billionths of a second with no operating system to freeze and no software surface to prompt-inject.

Watch 24/7 Live Board
  • 40 ns Physical Cutout 7.5 million× faster than an eye blink
  • 100 MHz Verified Live Silicon Zero OS jitter · deterministic timing
  • 3 Zones Hardware Air-Gap AI host never wires to actuator power
  • Zero EDA Sovereign Toolchain 100% Calera-owned · air-gap ready
  • 24 / 7 Live Proving Ground Unscripted public board under desk camera

Hardware Isolation Architecture

Three Locked Steel Rooms on Physical Silicon

Inside Calera-1, hardware resources are physically partitioned at compile time and silicon routing time into three isolated security domains. The AI host has no electrical wire to the physical actuator. Every command must cross strict hardware verification bridges before motor voltage is enabled.

VERIFIED LAB CAPTURE REPLAY Recorded bench telemetry from physical Calera-1 silicon @ 100 MHz (not a simulated randomizer)
Inspect Live Board on Camera →
Calera-1 Three Locked Steel Rooms hardware architecture separating untrusted AI host from physical actuator through Sensor Ingress, Deterministic Safety Vault, and Motor Power Interlock CALERA-1 ISOLATED SILICON PACKAGE (100 MHz DETERMINISTIC GUARD) UNTRUSTED HOST AI / LLM Planner Probabilistic GPU CMD: 42 (BAD) LINK ROOM 1 · INGRESS Sensor & Command Reads Hardware Safety Sensors Parses AI Proposal SENSORS: CLEAR ROOM 2 · VAULT Safety Verifier Locked Physical Envelope Rules Decision: 4 Ticks REJECTED · 40ns ROOM 3 · GATE Actuator Interlock Sole Motor Power Control (LD4 / STO) Hardware Clamping LD4 OFF · 0x00 LOCKED PHYSICAL MACHINE Motor / Actuator Zero Direct AI Wire SAFE HOLD (0V) HARDWARE ISOLATION: NO DIRECT ELECTRICAL PATH FROM AI TO MOTOR
REFUSED IN 4 HARDWARE TICKS (40 ns)

Capture 01 — Untrusted AI Proposes Out-of-Envelope Command

Hardware == Reference Model: Bit-Exact

The host AI model hallucinates an out-of-envelope actuation target. Zone 2 rejects the command deterministically in 4 hardware clock cycles at 100 MHz. Zone 3 keeps the physical motor-enable pin (LD4) locked OFF at 0x00.

Decision Time
40 ns (4 ticks)
Hardware Output
0x00 (Safe Hold)
Actuator Enable
OFF (Locked)
Envelope Reload
< 80 ms (No JTAG)
Unscripted Physical Silicon Proof · Running 24/7

Don’t Trust a Slide Deck. Watch Real Silicon Block Crashes Live.

Most physical-AI safety pitches ship edited sizzle reels. Calera Computing runs live physical safety silicon under an overhead camera 24/7 at caleralabs.com/live, where live internet viewers try to talk an AI warehouse robot into crashing while physical motor pin LD4 snaps OFF in 40 ns.

For Capital & OEM Engineering Teams: Book a private 20-minute live bench session where our team runs the physical board on camera—or test physical switch overrides yourself in person.

Open 24/7 Live Proving Ground
LIVE BENCH PROTOCOL 90-Second Proof Sequence
  1. 01
    AI Hallucinates Unsafe Command

    Untrusted host submits an out-of-envelope command over the wire.

  2. 02
    4-Tick Hardware Refusal (40 ns)

    Calera-1 rejects directly in silicon; physical motor pin LD4 stays locked OFF.

  3. 03
    Convergent Action Unlocks Actuator

    A valid command satisfies the safety envelope in 4 ticks; LD4 illuminates and actuator unlocks.

  4. 04
    Physical Switch Override (Zero Software)

    Flipping a physical sensor switch cuts motor voltage directly in hardware—proving true physical sovereignty.

Defensible Deep-Tech Moat

100% Calera-Owned Silicon Pipeline. Zero External EDA.

Unlike hardware startups tethered to monolithic vendor EDA suites or GPL open-source toolchains, Calera Computing built its entire clean-room compilation pipeline in-house. Every gate, route, and safety verification artifact is sovereign, auditable, and deployable air-gapped.

Zero Vendor EDA Lock-In Zero GPL Contamination 100% Air-Gap Ready Bit-Exact Parity Verified
Pillar 01 · Envelope Synthesis

Safety Law to Isolated Hardware

Compiles physical operating envelopes directly into isolated silicon zones—enforcing at build time that no untrusted AI signal can bypass the safety boundary.

  • Compile-time three-zone physical isolation
  • Bit-exact cycle-accurate verification parity
  • Zero dynamic memory or OS runtime surface
Pillar 02 · Clean-Room Closure

Sovereign Timing & Auditability

Proprietary clean-room silicon compilation achieving verified 100 MHz closure with generous headroom for dual-engine lockstep and multi-axis guards.

  • Zero third-party vendor toolkits required
  • Compact die headroom for lockstep redundancy
  • Full compiler audit dossier available under NDA
Pillar 03 · Failsafe Field Updates

Sub-80 ms Envelope Reload & Dual-Slot OTA

Update physical mission envelopes cleanly over the wire without reflashing JTAG, backed by hardware integrity verification and automatic golden-image fallback.

  • Failsafe dual-slot boot with hardware CRC checks
  • Rejects malformed payloads before silicon ingress
  • Swap AI models freely behind a locked gate

Category Creation

Why Calera-1 Occupies the Empty Cell in Physical-AI Safety

Software guardrails fail when the AI host freezes or gets prompt-injected. Traditional safety PLCs are deterministic but blind to flexible AI task envelopes. Calera-1 unites hardware determinism, envelope intelligence, and physical electrical isolation.

Architectural comparison of AI safety approaches across determinism, isolation, latency, and certification readiness
Safety Dimension Software LLM Guardrail Host-Side Rules Engine Traditional Safety PLC Calera-1 Hardware Firewall
Physical Failure-Domain Isolation No Shares AI OS & GPU No Same Linux host Yes Dedicated hardware Yes Sole electrical wire to actuator
Worst-Case Decision Latency 100 – 2,000 ms (probabilistic) 1 – 50 ms (OS / GC jitter) 1 – 10 ms (scan cycle) 40 ns (4 fixed ticks) · zero jitter
Prompt-Injection & OS Exploit Immunity Vulnerable Text attack surface Partial Root compromise risk Immune No LLM parser Immune Hardware-enforced domains
AI Skill & Multi-Sensor Context Awareness Yes Unbounded / drift-prone Partial Brittle host scripts No Blind to AI task semantics Yes Locked physical safety envelopes
Model Upgrade Recertification Cost Re-validate entire stack every checkpoint Coupled to host software release Cannot supervise flexible AI skills Swap AI models freely behind locked silicon gate
Air-Gapped Sovereign Toolchain Cloud / external weights Complex third-party OS stack Proprietary vendor IDE lock-in 100% Calera-owned · zero third-party EDA

Zero-Rewrite Continuity

Start Hands-Off on the Dev Kit. Scale Into Dedicated Silicon Together.

Put a self-contained Calera-1 Dev Kit straight onto your lab bench today with zero external EDA dependencies. When you are ready for production fleets, individual OEM guard modules and companion silicon are scoped one-on-one with our engineering team under NDA.

Gen 0 · Hands-Off Pilot Kit Live Silicon

Calera-1 Dev Kit

Turnkey Reference Hardware Appliance

  • Pre-provisioned with isolated 3-Zone physical safety guard
  • Plug-and-play serial & Ethernet host bridge + physical I/O
  • Includes sovereign envelope compiler & bit-exact verifier
Hands-Off Kit: $4,500 / kit Pilot Ready
Gen 0.5 · OEM Carrier Upon Request

Calera-1 Guard Module

Embedded Industrial Safety Module

  • Dual-engine hardware lockstep with continuous self-test
  • Industrial bus interfaces & real-time proximity sensor I/O
  • Opto-isolated dual-channel SAFE_ENABLE actuator cutout
Individual Units: Upon Request 1-on-1 Partner
Gen 1 · Companion Die Upon Request

Calera-1 Silicon (ASIC)

Hardened Low-Power Companion Safety Die

  • Hardened sub-50 ns multi-gate deterministic guard
  • Ultra-low-power footprint for edge & airborne platforms
  • 100% binary & wire-protocol compatible with Gen 0 kits
Allocation: Upon Request OEM / NDA
Gen 2+ · Sovereign Fleet Horizon

Calera-2 Co-Processor

Next-Generation Autonomous Fleet Silicon

  • High-density deterministic co-processor architecture
  • Native continuity for existing Calera safety envelopes
  • Designed for aerospace, surgical & humanoid fleets
Access: Strategic Partners Multi-Year

High-Consequence Markets

Built for Machines Where a Hallucination Is Unacceptable

Regulators cannot certify probabilistic neural weights—but they can audit and certify a deterministic hardware interlock sitting physically between the AI and the machine.

IEC 61508 · ISO 13849 Path

Collaborative & Industrial Robotics

Deploy foundation-model task planning on factory floors and warehouses while locking torque, velocity, and human-walkway boundaries in immutable silicon.

DO-254 · DO-178C Path

Aerospace, eVTOL & Autonomous Flight

Enforce flight-envelope ceilings, geofences, and air-gapped sovereign hardware builds with zero foreign or third-party EDA toolchain dependencies.

FDA Class III Interlock Path

Surgical & Laboratory Automation

Physically prevent out-of-order actuation, energy ceiling breaches, or kinematic excursions on robotic surgical and automated lab platforms.

NERC CIP · Substation Guard

Critical Infrastructure & Energy Grids

Sub-microsecond hardware refusal of unsafe AI-proposed breaker or microgrid relay commands with physical operator lockout switches.

Track 02 · 1-on-1 OEM Units

Individual Units & Custom Silicon

Production guard modules, custom mechanical/electrical interlock envelopes, and companion ASIC licensing are scoped directly one-on-one with buyers under mutual NDA.

Track 03 · Capital & Federal R&D

Investors, SBIR & Research Grants

Inspect the full Silicon Verification Ledger, compiler architecture, and USPTO patent docket under NDA—and experience a live bench demo on camera.

Engineering & Certification Transparency

All 100 MHz, 40 ns, and bit-exact hardware verification claims reported on this page are measured directly on physical commercial FPGA bench silicon compiled end-to-end by Calera’s proprietary toolchain—never simulated or extrapolated. Embedded OEM modules and companion ASIC specifications are engineering horizon targets scoped individually under NDA. The Calera-1 Dev Kit is an evaluation and secondary deterministic interlock platform designed to support future DO-254 / IEC 61508 / FDA safety paths—it is not yet a formally certified safety PLC and must operate alongside required mechanical/electrical E-stops.

Ezekiel Gate Stewardship & IP Protection

Calera Computing, Inc. deploys physical-world hardware exclusively for human safety, industrial reliability, commercial robotics, and defensive assurance—never for autonomous lethal targeting or mass surveillance. All deployments are subject to written stewardship compliance and export-control screening. Detailed hardware bills of materials, toolchain stage specifications, verification logs, and patent docket materials are disclosed strictly under mutual NDA inside our Partner Data Room.

CALERA COMPUTING, INC. · HARDWARE & CAPITAL DESK

Request Calera-1 Kit or 1-on-1 Briefing

Select your track below to generate a pre-structured request for our hardware team (support@caleralabs.com). Individual unit pricing and full silicon schematics are shared one-on-one under mutual NDA.